Dually

Dualie Cone Seat Lug Nuts are designed for Dual Wheel Applications that require cone seat fitment. These lug nuts have a 90° taper and must only be used on wheels with a 90° taper seat.

Dualie Mag Shank Lug Nuts are designed for Dual Wheel Applications that require a mag shank fitment. These lug nuts have a .80” Shank Length and .80” Shank Diameter. It is imperative to make sure the shank length and diameter is the correct length for the application, and that the shank does not bottom out before being fully torqued. Washers are required for this lug nut.



Dually Cone Seat
2.10″ Long 1″ Hex
14mm 1.50 – 3109
9/16″ – 3110
9/16″ L.H. – 3120
5/8″ – 3130


Dually Cone Seat Short
1.65″ Long 1″ Hex
14mm 1.50 -3109A
9/16″ – 3110A


Dually Mag Shank Short
1″ Hex
.80″ Shank Diameter
.57″ Shank Length
2.02″ Overall Length
5/8″ R.H. – 9308
14mm 1.50 – 9309
9/16″ R.H. – 9310


Dually Mag Shank
1″ Hex
.80″ Shank Diameter
.80″ Shank Length
2.25″ Overall Length
5/8″ R.H. – 9108
14mm 1.50 – 9109
9/16″ R.H. – 9110
14mm 2.00 – 9150


Dually Cone w/attached washer
1″ Hex
2.20″ Overall Length
14mm 1.50 – 3109W
9/16″ R.H. – 3110W